Torpedo III Tube CCSs

*** Price is for ONE PAIR of CCS Boards, Pre-soldered ***

These are improved Constant-Current Supplies (CCSs) for the Torpedo III. They are meant to take the place of IC1 and IC2 for improved performance of the Torpedo III.

These are designed by ECP Audio. Beezar Audio has pre-soldered and fully tested them before packaging. Because of the nature of the surface-mount design, these are only available in finished/tested form and in pairs. Simply install them on the "k" and "a" pads where you would've soldered IC1 and IC2. We recommend that you install them on the bottom of the PCB, flush and out of the way as shown in one of the photos on this page.

IC1 and IC2 use three pads each. However, these CCS boards only use two pads each. The "k" and "a" pads are shown with arrows on the bottom of the PCB in the photograph.

Note: these PCBs are broken apart into tiny individual PCBs from the manufacturer. As a result, there are sprues sticking out in the middle of all four sides of the tiny boards. These will not affect the function. Neither will they get in the way if you solder them flush on the bottom of the PCB as recommended. If you're a stickler for appearances, however, feel free to sand the sprues away flush to the edges of the boards.

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
We Accept
SSL Certificate
0 items
Manufacturer Info
ECP Audio
ECP Audio Homepage
Other products
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Complete documentation and building instructions for all Beezar products are at DIYForums.org
  Monday 11 December, 2017  
  2531663 requests since Saturday 23 August, 2014  
The current beezar.com theme is sunny