Neutrik 1/4-inch Stereo PCB Jack
$2.50
Product may vary slightly from image representation.
Live Stock Check: 20 units
Genuine Neutrik 1/4" stereo jack, switched, with chrome ferrule, flared finish washer, extra spacers, and straight PCB pins.
- Wide body and extremely durable contacts
- Mates with all stereo A-gauge plugs acc. EIA RS-453 standard
Dimensional Drawing:
st-nmj6hcd2.pdf
Note: The Millett Hybrid MAXed printed circuit board is designed for this jack. Additional pics follow the technical specs below.
From Neutrik:
Product |
Connector Type | Jack |
Gender | female |
Electrical |
Contact resistance | < 15 mΩ |
Dielectric strength | 1 kVdc |
Insulation resistance | ≥ 1 GΩ @ 500 V dc |
Rated current per contact | 3 A |
Rated current per contact | 0,50 A @ 50 V (Switch contact) |
Switching contacts | 3 |
Switchable | yes |
Mechanical |
Insertion force | < 20 N |
Withdrawal force | < 10 N |
Lifetime | > 10000 mating cycles |
Panel thickness | < 4.7 mm |
Wiring | Horizontal PCB mount |
Locking device | retention spring |
Mounting direction | rear |
Chassis shape | 11.4 mm |
Material |
Cap / Nut / Washer | PA 6.6 15% GR |
Contacts | Nickel-Silver |
Shell | Polyamide (PA 6.6 15 % GR) |
Environmental |
Standard compliance | EIA RS 453, IEC 60603-11 |
Solderability | Complies with IEC 68-2-20 |
Temperature range | -25 °C to +70 °C |